I have an external application that determines the best reference Product and Bin. These calculated data I need to move to SAP system.
SAP EWM has Assignment Table for Fixed Bins - Product /SCWM/BINMAT.
Question.
As a similar assignment is implemented in the SAP WM?
I found only a table MLGT. But I'm not sure. Tell me, if my assumption correct?
Hello,
I have the given situation, during the packing of a product (which is unpacked) in the Work Center I get the following error message:
"Stock for required data does not exist
Message no. /SCWM/L3104"
After a debugging session we have found the cause as being the field FLGAVQ (Indicator: Handling Unit Contains an Available Quantity) in the structure /SCWM/S_HUHDR_INT. My question is if somebody knows from where this mark comes and if you stumbled on the same problem and if so how did you manage?
All the best,
Claudiu Maxim
Hi All,
Good day, During outbound process we have a requirement where the stock is picked from respective storage type and moved to packing station and out of 100 quantity 50 need to return back to same storage type from packing station.
Please let me know if we need to use the LOSC pick-point to achieve this or any other process for the same.
Kindly let me know the configuration for the same.
Regards,
Rahull
Hi All,
in EWM, simple co-ordinates for XYZ at Bin level works fine. It also show graphical layout of them.
I need help for GWL object configuration like for Offices, Walls etc.
How can we map different parameters like. X, Y upper left/right, lower left/right etc? and based on those how it will be presented in graphical layout?
Hi EWM Experts,
How the Automatically Generate Packaging Items works in EWM.
Any prerequisites and necessary configuration
Kindly let me know please.
Thanks & Regards
Ramesh.R
Hi All,
I have created 12 bins with 12 activity area with a Feeder in the front and assigned the 12 activity to 12 queue for respective bins for which system is performing fine.
In RFUI Until the first Warehouse Order is completed system is not allowing to move to next Warehouse order.
System is throwing the following error in RFUI
E: There are open HU WTs; Repacking on
possible via WT (/SCWM/UI_PACKING051)
And the WOCR is User Driven not System driven.
Please let us know if Am following the right process or something need to configure to move forward.
Regards,
Rahull
Hi Experts,
In our Outbound process the Route will not coming from ECC outbound delivery. We manually assign the Route in EWM and the same route information should be updated back to ECC outbound delivery.
Is there any specific config to allow the route information from EWM to ECC outbound delivery updation.
How is it possible. Kindly let me know please.
Thanks & Regards
Ramesh.R
hi experts,
i have been in EWM for almost 1 year, but still i feel very strange with WT items, always the first item will have a blank destination and the second item have a blank source .
this issue besets me a lot ,both goods issue and putaway can have this kind of issue.
if you know the background appreciating your notes!!
Storage bin for goods movement postings not determined
Dear all
I trying to do an complex inbound with HU, i am getting the below mentioned error
Thank you
BR
Ananth
Hi Gurus,
Our business need to implement Planned and Order- related replenishment.
But we are unable to differentiate between these two replenishment .
Would appreciate if anybody will explain in detail who has better understanding.
Regards,
Srini V
Hello Experts
I need report of Serial Number Profile attach to Product Master. I tried MASSD transaction but I didnt help me.
Is there any transaction or table that I need to use?
Thanks
Ankit
Hello Experts,
I have done all the configuration for automatic HU creation once inbound delivery gets created.
Created pack spec and maintained 0IBD condition type in it.
Why system is not creating auto HU after inbound delivery gets created ?
Please let me know whether I am using correct condition type or not ?
Where I am missing ?
Please throw some light to solve this problem.
Regards,
Abhi A
Hi All
We are currently in the process of implementing EWM. We would like to use EWM's Catch Weight Management feature. We do not intend to activate ECC CW.
In order for us for use CW at EWM level, Catch Weight needs to be activated in ECC article master by setting "Parallel Unit of Measure".
However, SAP does not allow us to do this (by default) for existing articles.
One option is to create new CW articles. Unfortunately, this is not something the business will accept.
There is a workaround which is to implement BAdI: Check Changes Made to Units of Measure.
However, we are nervous about implementing this BAdI given the unknowns and financial implications it may have. No one in SAP has been able to give us a definitive answer.
It must be noted that will needs to be done for articles at a new warehouse which will not have any valuation.
Please advise.
Hi Experts,
We have a requirement for custom wave template creation in EWM. The ECC is IS-Retail system and in the material master we have some custom fields like Material index, subindex, etc... It basically represents product hierarchy like Mens Wear > Trouser > Waist 32"
In the EWM we have created the same fields in the product master and the data is in sync between ECC and EWM.
I want to now create a Wave template considering index, subindex. The question is do these fields need to appear in the ODO so that wave template can fetch them from ODO and group into a wave? At present we don't have them in the ODO.
Please give your valuable suggestions.
Thanks,
Sushant
Hello EWM experts,
I am setting up the system to test the Pick Pack and Pass scenario as we have conveyors that carry the Pick HUs(totes) to the picking stations.
I am able to create Warehouse orders(Parent and child) along with Pick HUs(Totes) now, but when I confirm the picking tasks on RF, the destination bin that shows up on the RF screen is not the bin of that activity area but the packing work center.
Packing is the next step after after all the picking is completed (all sub warehouse orders are confirmed) in POSC.
I am expecting that user be allowed to scan the destination bin of the picking station after picking is completed in that picking station so that the same tote(Pick HU) can then be taken by the conveyor to the next picking station.
Am I missing something?
Thanks
Saji George
Hello,
I have the given situation, during the packing of a product (which is unpacked) in the Work Center I get the following error message:
"Stock for required data does not exist
Message no. /SCWM/L3104"
After a debugging session we have found the cause as being the field FLGAVQ (Indicator: Handling Unit Contains an Available Quantity) in the structure /SCWM/S_HUHDR_INT. My question is if somebody knows from where this mark comes and if you stumbled on the same problem and if so how did you manage?
All the best,
Claudiu Maxim
Hi
We pick stocks from a non-HU managed storage type and delivered to production supply area bin in two stages. In the first step, fork lift operator picks from the High rack and places on to the Toe Train. In the next step Toe Train operator delivers at the Product supply area bin.
When we are trying to set up LOSC without Pick point for the above scenario, during the WO creation we get error "Creation of HU not possible as HUs are not allowed in storage type .....".
As per my understanding, we neede to create HU to move materials in LOSC (without Pick point) via intermediate storage type. This does not mean that we need to have HU management active for the source storage type.
For testing purpose, I have allowed HU stocks for my source storage type...then WO creation was successful...but I only got Product WT from source to destination storage type. System did not create HU WT to move the stock from source to intermediate storage type.
Does anyone has clue on my problem?
Thanks & Best Regards
Suresh
Hi experts,
We are trying to configure the layout oriented storage control. We have done the required config as per our understanding. The system is identifying the requirement of the intermidiate step for the defined destination storage type.
The issue is, system is creating only one warehouse task to move the HU to ID point. It is not creating the second task to move it to final location. So basically, it is just replacing the final destination (as per the putaway logic) in the task to the ID point defined in layout oriented settings and not splitting the task.
Any pointers to the missing config / logic.
Thanks in advance.
Hi,
after creating batches by using MSC1 in LSMW and creating a batch input map. the batches are in the ERP-System but not in the SCM System.
By creating Batches with MSC1N manually, the Batch is ciffed to the SCM-System.
I have an active Integration model for material master witch Batch, running every hour.
The setting for Material Master Change Transfer in the CFC9 is set to "2"
Is there anyone with experience in creating batch-master data for Migration?
Thanks for all info
Bernd
Hi,
I am unable to assign physical inventory warehouse order to resource in warehouse monitor. I am getting below error message
Message no. /SCWM/RSRC038
Queue was automatically assigned without issue. i already referred below link but my issue is not with the queue assignment. we are in EWM 7.0 version. Any help is highly appreciated.