Quantcast
Channel: SCN : Discussion List - SAP Extended Warehouse Management (SAP EWM)
Viewing all 1643 articles
Browse latest View live
↧

Unable to do CIF for material master

October 22, 2013, 10:24 pm
$
0
0

Hello Experts ,

 

I'm trying to do CIF of material master from ECC to EWM system . I'm getting error  -  Logical system P31CLNT001 has not been assigned to any business system group.

 

I have checked the below Settings  :

 

- In ECC , Logical system and assignment .APOCLNT890 is EWM system and T90CLNT090 is ECC system .

-In SCM side , Maintain Business Groups , it is maintained as BSG_EWM ( Business System Group EWM ) and ERPPDC ( Business System Grp for ERP ) BSG_EWM is assigned to APOCLNT890 and T90CLNT090.

 

I'm not understanding from where P31CLNT001 is fetching and giving error while data transfer . Can anybody help me  Please  ??

 

Thanks and Regards

Pavan

↧
Search

2 different PPF actions triggering two different smartforms

January 14, 2014, 1:42 pm
$
0
0

Hi,

How to trigger two or three different smart-forms (which are triggered using different PPF actions) on to the same spool?

Suppose I have two ppf actions

1. triggers  X smartform.

2 triggers   Y smartform.

 

one after the other. Now the requirement is get the both into one spool. I know we can do by open-spool and close-spool. But I'm not looking for this solution.

Is there any specific configuraation with PPFs?

 

Thanks,

Sandhya

↧
↧

POSC+LOSC in Putaway

June 4, 2014, 8:53 am
$
0
0

Hi All

 

I need help to configure below scenario in EWM. Warehouse receives the inbound HUs which can contains single material or multiple materials. For the normal HU, putaway should happen after unloading and for mixed HUs, putaway should happen after sorting. For this, I have configured de-consolidation and POSC. But somehow, it is not working. All kinds of HUs are coming to de-consolidation workcenter after unload. This is my issue one.

 

The other challenge here is the mixed HU will be de-consolidated based on material and moved to interim storage area before final putaway. Again here, they re-pack based on capacity of resource and then do putaway. This I have achieved partly by calling LOSC before putaway task in POSC. So, now I will get tasks to move HUs from de-consolidation area to interim storage area and then to final bin. But I am not able to do re-pack at interim storage area.

 

I have tried to put packing task before putaway task in POSC, and configured interim storage area as work center - LOSC is not triggered.

 

Any thoughts to solve these issues?

 

Thanks

Sasidhar Gupta

↧

Inbound delivery not getting active

June 4, 2014, 4:42 am
$
0
0

Dear All ,

 

I would like to find exact cause of inbound delivery error status , kindly guide as how can  i achieve same.

 

Message log / check button is not  dsplaying error messages.

 

Capture.JPG

 

 

Thanks

Jinoy

↧

Transfer Order completed but still stock showing in minus

April 24, 2014, 2:17 am
$
0
0

Dear All,

 

I have checked the status of wm stock in lx02 qty showing -20.

 

BIN Status.jpg

 

Currently system showing as BIN-4000024  with -20 qty, while posting source and target storage bin as shown in fig.

Please help me to remove out wm stock.

 

Regards

Sanjeet

↧
↧

LT03 - WMTORD not required during transport order creation

June 17, 2014, 7:55 am
$
0
0

Hi Experts,

 

We have an issue concerning Idoc creation on LT03.  We have done the configurations on OMKY for creation of Idoc WMTORD.  The issue is that we do not want the Idoc to be created when the transport order is created on LT03.  We want it to be created only when the transport order is confirmed on LT12.

 

Could you please advise how to proceed?

 

Thanks,

Vitish.

↧

Unit of measure in Product master

June 17, 2014, 12:24 am
$
0
0

Hello Experts,

 

I have a product with below UOMs. I am trying to place this product with 1 PAC in a bin which has capacity of 510 kg.

How does the system calculates for this product weight to place in bin?

 

UOM.png

 

Thank you...

Sridhar

↧

Outbound scenario

June 15, 2014, 11:59 pm
$
0
0

    Hi ,

 

 

VAS activity depends on customer.

Product A can give to customer X with applying label and can give to customer Y without applying label.

Presently we maintain  VAS condition record in AFS ERP system and trigger to  WMS system.How can I this MAP in EWM System? How can I do different VAS activity for one product depends on the customer?

 

Regards,

Steve

↧
Search

PDO Lock on a product/material

June 19, 2014, 1:10 am
$
0
0

Hello SAP Gurus

 

again i am in need of your advise/help.

 

I currently have an item that is showing available on both EWM and ERP due to it having a PDO lock.please see screen shot below:

PDO lock.PNG

I need to remove the PDO lock on this item so that my stock shows zero for this item as we donot have stock physically.The dcument in ERP has GI completed,does any one know how to remove the PDO reference?Please assist urgently.

 

stock check.PNG

↧
↧

QIE

June 18, 2014, 6:05 pm
$
0
0

All,

 

Iam new to QIE in EWM and had a few questions:

 

 

 

1. I am setting up QM in ECC. I have a conversion for Inspection Plans in ECC. I have been advised to create a conversion file for Inspection Plans on the EWM side. Need some inputs on what the conversion file will look like in QIE. From my preliminary research I think you need to create an Inspection Rule Group, Inspection rules, Inspection Object Type?? Kindly let me know if iam on the right track

 

2. In ECC I would like to use an inspection type 04 with the post to inspection stock indicator deactivated. So it will not be stock relevant. Can this still be used with EWM being implemented. Iam assuming I can still do a GR for a Production Order, create a non stock 04 inspection lot and print the COA at the time of picking of the delivery without using an inspection type 17? Kindly advise

 

3. If I am using the inspection type 17 do I have an indicator for 'Post to Inspection Stock' like we have in the stock relevant inspection types in ECC.

 

 

Thanks in advance.

↧

Stock Upload in EWM through /SCWM/ISU

June 18, 2014, 10:45 am
$
0
0


Hi Experts,

 

I understand that we can use subject mentioned t code for stock upload in EWM but how we will mass load (@50000 material stock)? I do not see to run this code in background. This tcode will update  stock in ECC as well. I fear if we run this in foreground and system connection goes then it will be problem.What shall be our approach?

 

Please reply.

 

Thanks & Regards,

 

Prashant Dhakane

↧

Unit of measure issue when PGI done through IDOC

June 19, 2014, 2:51 am
$
0
0

Dear Experts

 

In my system PGI against outbound delivery is being done through inbound idocs in SAP. In my outbound delivery the sales unit is maintained as CS (Case) and BT (Bottle). The quantity in my delivery is 10 CS and 10 CS for both the line items. When IDOC is getting posted in SAP it has quantity as 10 in field LFIMG of segment E1EDL24 of IDOC type DELVRY07 for both the line items. We are not passing any unit in the field VRKME of segment E1EDL24 of the IDOC. The IDOC gets successfully posted but when I check the PGI document the it shows quantity as 0,417 CS and 0,0833 CS.

 

1 CS = 24 BT for material 10002616

1 CS = 12 BT for material 10002617

 

Base UoM for both the materials in the delivery is BT. What SAP is doing is converting the CS quantity in terms of base UoM. I have attached the PGI document and outbound delivery screenshot for reference.

 

After PGI the outbound delivery line item quantity changes as shown in the attachment.

 

Please let me know how to resolve this conversion issue so that I pass the same quantity as in my outbound delivery in IDOC and PGI should get posted with any change in quantity in my outbound delivery in terms of base UoM.

 

Thanks and Regards

Satish Kumar

↧

How to clear storage type 904 when it's negative?

June 19, 2014, 8:23 pm
$
0
0

Dear all,

 

When I check material 109844 inventory in WM, I found the type 904 is negative as following display.

 

the operation of 202(movement type) makes a generation of 904, but it normal is positive. Who can tell me why it's negative now and how should

 

I clear it now?

 

Chrysanthemum-1.jpg

 

Sandy

 

Thanks and Best Regards!

↧
↧

EWM - Goods Issue - Storage Type Search sequence for Customer/ Material

June 17, 2014, 7:15 pm
$
0
0

Hi Experts,

 

I want to optimize the storage type search sequence and therefore have a customer or material specific search sequence.

The optimization of the "Access Strategy for Storage Type Sequence" is providing this function, but the description of the selection fields is very poor. So I am having a hard time finding the related fields in the master data which are relevant to activate the access strategy.

 

Please advice.

 

Generally it would be great knowing how to use these access strategies and what prerequesits are neccessary to use them.

 

br,

Arnulf

↧

EWM GI sync failed due to HU not exist in ERP

June 19, 2014, 11:33 pm
$
0
0

Dear Experts,

 

We have done the control message processing in EWM(which set GR message send to ERP not reporting HU, but will this setting work for GI too??) . But still get the error of HU packing material not exist in ERP inbound queue after GI. Please kindly advise as how should we stop sending HU info during GI

 

Best and Thanks,

Eddie

↧
Search

Adding item level field to field catalog for a PPF for Outbound Delivery

June 20, 2014, 5:40 am
$
0
0

Hi,

We wish to send a method call to an external system at the time of PGI of the Outbound Delivery Order for the combination of Product/Ship To combination.

 

Since Product is at item level and not in the standard field catalog, I added it to the field catalog in config, defined a new condition table, access sequence, condition type and maintained it in the right Procedure/Maintenance Group (Outbound Delivery).

 

Then I defined a new Action Definition, with a new method to send the details to the external system, but am confused on what Schedule Condition I should assign to this Action Definition. If I use standard Outbound Delivery Printing Schedule Condition /SCWM/FDO_PRINT, the PPF only triggers when I use the standard condition type 0DDN with the standard Access Sequence (no Product available). However if I use the new condition type (with product) with the same Schedule condition: /SCWM/FDO_PRINT, the PPF does not get triggered. The log in SLG1 simply says Condition is not fulfilled.

 

Can you please suggest

Do I need to work with my developer on building a new schedule condition which would look at the new condition technique I have condition records for? Or is there a non ABAP way of making this work?

 

Lastly, if my ODO has 5 items with only 2 products which have condition record, I want the PPF to be triggered 2 times for that Outbound Delivery.

↧

Mixed storage issue in bin

June 20, 2014, 5:53 am
$
0
0

Hi Experts,

 

Our warehouse don't allow mixed storage of products for any bin. But, i see there are two products in specific bin. Which is issue now.

I tried to look at back at storage type level and product level for any assigned fixed bins, I dont see anything wrong there.

 

Can you please help me what else could be causing this issue to store mixed products in bin?

 

Thank you in advance.

 

Sridhar ...

↧
↧

eWM - Storage Bin Data

June 22, 2014, 10:01 pm
$
0
0

New guy here, so please go easy! :-)

 

I'm currently the master data analyst for all storage bins and articles at my current distribution center. I manage dimensions, weights, sequencing, WM Views, etc.

 

Our facility is scheduled to go live with eWM October 2015.  I have been tasked with researching how to exploit all features of managing storage bin media, especially with respect to setting the XYZ coordinates.

 

How would one benefit from exploiting the coordinate features?  What role does it play in determining picking/receiving work loads (i.e. calculating distances between bins)?  I'm very curious to learn more about how to better manage the storage bins in our warehouse once we go live with eWM.

 

I appreciate any feedback and/or links to good, solid literature about the subject.

 

Thanks!


Dan

↧

Fixed "Default" Storage Bin per Storage Location

June 23, 2014, 4:37 am
$
0
0

Hi all,

 

I have a Storage Location (1234) with only one Storage type (FIX) and one Storage Bin (FLOOR).

What I want is all materials should go (when receiving) to this Storage Bin.

 

I have configured the Putaway strategy for the Storage Type "F - Fixed bins"

But it's not working. The system is always considers the Next empty bin strategy.

 

I don't want to make the storage bin fixed per Movement type or per material...The same material can be maintained in different storage locations.

 

Thank you

 

 

Best regards,

Kifah Yacoub

↧

Single WO create for per bin when pick

April 2, 2014, 11:35 pm
$
0
0

Hi,

    I have a question,how to actualize one WO per bin when create picking WO,at limit configuration(spro),I don't find  config about this issue,please      give me any advise.

 

Thanks and Best Regards,

 

Wilson

↧
Viewing all 1643 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>