Hi Experts,
Can anyone help me with more details of Queue management.
1.Need to know the steps how the WT are assigned to the worklist
2.Assignment of resources and WOs to queues.
In addition to that please help me with more details for Queue monitoring.
1. Inbound Queue
2. Outbound Queue
Which scenario the queue get stuck and how to fix the issue. ( I am aware of the basic Queue Process just need to understand the difference issues which we are face in the production )
Thanks
Hi,
I have created and Inbound delivery in ERP, the material is batch managed and packed with HU. Once saved on ERP system, I find the Inbound Delivery Notification in SCM EWM system with HU, material and batch number appearing. Up to this point all good.
However, when I am trying to hit the button 'Activate' so that I can create Inbound delivery, system comes up with error message - 'Please specify an external number range' (message NR753) I have no idea where it's coming from.
For further information - I am using standard Doc Type INB with Doc Cat. PDI and it's assigned with an Internal Number Range.
What's missing?
I help will be rewarded.
Thanks,
Amit
Dear Experts,
When Customer number = Vendor number
How to CIF transfer to EWM?
We mete the error message: "Business Partner XXXXis exist!"
Thank You
WT
Dear Experts
In my system PGI against outbound delivery is being done through inbound idocs in SAP. In my outbound delivery the sales unit is maintained as CS (Case) and BT (Bottle). The quantity in my delivery is 10 CS and 10 CS for both the line items. When IDOC is getting posted in SAP it has quantity as 10 in field LFIMG of segment E1EDL24 of IDOC type DELVRY07 for both the line items. We are not passing any unit in the field VRKME of segment E1EDL24 of the IDOC. The IDOC gets successfully posted but when I check the PGI document the it shows quantity as 0,417 CS and 0,0833 CS.
1 CS = 24 BT for material 10002616
1 CS = 12 BT for material 10002617
Base UoM for both the materials in the delivery is BT. What SAP is doing is converting the CS quantity in terms of base UoM. I have attached the PGI document and outbound delivery screenshot for reference.
After PGI the outbound delivery line item quantity changes as shown in the attachment.
Please let me know how to resolve this conversion issue so that I pass the same quantity as in my outbound delivery in IDOC and PGI should get posted with any change in quantity in my outbound delivery in terms of base UoM.
Thanks and Regards
Satish Kumar
Hi Experts
I'm new in WM,
We have a big tanks for oil which will be used by the production as a component during the production process, these tanks is in the PSA "Production supply Area" and the supplier provide the oil directly to PSA ( not throug the Warehouse) so these tanks are under the production control.
we need to implement this process in SAP.
we need the stept by step implementation of that request
your support is highly recommanded for us
Many thanks in advance
Olfa
Hi Gurus,
I have an issue in determining destination bin for a product. I added measurement details of bin type and bin along with UOM details of product.
I am not sure is that problem with volume details of bin type and product or bin.It is supposed to go into the bin which i have added in screen shot.
Will that bin allows the products(not HUs) to place in bin if the bin type is maintained for bin?
Can you please help me here to understand how does system calculates for placing by considering all above cases?
Thank you.
Hi All
Route in outbound delivery of ERP is not getting reflected in EWM ODO. I have done below settings in IMG.
Extended Warehouse Management --> Goods Issue Process --> Outbound Delivery --> Route Determination --> Activate or Deactivate Route Determination
DOC TYPE - OUTB
RD/RC Status - 2
RD Sequence - Standard logic
RD ERP - No determination if Route origin is in ERP
Extended Warehouse Management --> Interfaces --> ERP Integration --> Delivery Processing --> Map Routes and Route Schedule from ERP System to EWM
Mapping Route - 2
SCM Basis --> Routing Guide --> General Settings for Route Determination
standard setting
Please help where I missed.
Thanks
Sasidhar Gupta
I´m working with ERP 6.0 and EWM 7.0. When an outbound delivery is created in ERP, this document is sended to EWM as outbound delivery request and then an outbound delivery order is created. How can I reject or reverse the outbound delivery order (ODO) in ewm?.
Carlos Lebit López
Hi,
Im not being able to serialize products in EWM. Following are the settings I've done.
1. I've defined serial numebr profile in ERP and EWM. The one relevant for EWM is populated in 'WM Execution' Tab in ERP and 'Storage' Tab in EWM. (Im using Serialization requirement at Inventory Level)
2. I've checked the SN checkbox for the relevant Item Type.
Now when I create a Inbound delivery in ERP and transfer the same to EWM, serial numbers are being copied to IDN but not to the Inbound Delivery. When I try to create serial numbers manually I'm getting the following error :
Please suggest what am I missing here.
Any help will be appreciated.
Regards,
Oritra
Hi All
Inspection document created in EWM is not able to create inspection lot in ECC. In the inspection document, it is identifiying external system and its business system properly. But seems to be communication is not happening properly. what should I check?
Thanks
Sasidhar Gupta
Hi All
For the development of prototype we have made some dummy warehouse structure and made stock movements with dummy bins. Now we wanted to go for real implementation. Before we made actual configurations, we wanted clear all dummy data. Can anyone suggest the standard process for clearing the stock, storage bins?
Thanks
Sasidhar Gupta
Hi Experts,
Warehouse product master has stagarea/DoorDet.grp (staging area and door determination group)
maintained, but if i see in table: /SAPAPO/MATLWH is not updated. FiDRDETGR (stagarea/DoorDet.grp) is blank.
With this issue staging bay and door determination is not happening automatically.
Can you please tell me what is the issue ?
Thank you in advance.
Hi Experts,
I have issue in determining destination bin, For the capacity check as '1' - (Check according to key figure product) in storage type configuration, Can be the Capacity consumption as '0.000' in product master level?Will it cause any problem in determining destination bin?
For capacity check method '1', will that system consider capacity based on weight and volume of the product or only weight of the product.
And, In storage type, putaway rule is: Addition to existing stock/empty bin and HU requirement selected as HUs not allowed and with this configuration, Can i use capacity check as '3' - (Check according to key figures product and HU types)? My doubt here, is When HUs are not allowed in warehouse, capacity rule '3' is valid one or not here in this case?
When the HUs are not allowed in storage type, what is this mixed storage and mixed storage in hu selected as option '2' for both of them in storage type?
Can you please in this issue?
And, in storage bin display - statistics tab - what is that Last clearing date denotes for ?
Thank you in advance.
Hi friends,
we following palatalizing method. we are receiving and tracking material based on pallet and pallet no.....when we are receiving pallet it showing fully supplied or it showing some other information so i went delete the information so can any pls tell how to do it?
Hi,
We have implemented the exception handling when the pickers finds "different product stock or no stock" in the source storage bin for the step "05 - RF product WT action on source data", he enters the exception code, which has been mapped to process code (BPRP) to trigger replenishment and follow on action to block the source storage bin for further stock removals.
In this scenario, suppose if we have already open pick WTs for the same source storage bin (WTs created before the bin is blocked) and the system will still allow to confirm the another pick WT, though the bin is already blocked by the exception code.
So, I have added another process code WTCA to the same exception code and also mapped the same exception code for the process type under " Define control for blocking storage bins". But, still the open pick WTs are not cancelled
Do you see if anything is missing and suggest any other way to cancel all the open pick WTs, when the bin is blocked by the exception code..?
Regards,
Shravan
Hi I had already finished the installation ERP 6.0 EHP 7 Server and I want to install Add-on EWM 9.1 package on ERP system. To install, I follow up SAP Note 1892669 - Installing or upgrading to SAP EWM 9.1. When I try to use T-Code : SAINT to install these packages (SCM_BASIS rel. 713 and SCMEWM 9.10), I get this information "The installation of SCMEWM rel. 910 must be configued with a Stack XML". Could you please advise how to fix this problem?
Hi Expert
We need to implement the logic for automatic transfer order,
the Idea when we Receive the Goods from Vendor and while posting goods via Migo we want that the system create automatically the TO.
the same approach to be implemented for GR from Process Order we need that the system create TO directly to the right Bin
Your support is higly recommanded
Olfa
Hello everybody!
I am trying to delete product from SAP EWM by putting flag for deletion, but i get a mistake:
Message no. /SAPAPO/MAT028".
In WUF i can see that this product is still used in warehouse task and outbound order, but these documents have status C (finished).
What should I do ?
Should I archive these warehouse tasks and delivery ?
How can I delete this product ?
Hi Experts,
Need your views on developing Productivity and Planning report in SAP EWM. We are not using Labor management. Can we achieve this through modifying monitor? Or do we need development? We are using SCM 7.0
Thanks for your views.
Regards,
Prashant
Hi Experts,
I understand that we can use subject mentioned t code for stock upload in EWM but how we will mass load (@50000 material stock)? I do not see to run this code in background. This tcode will update stock in ECC as well. I fear if we run this in foreground and system connection goes then it will be problem.What shall be our approach?
Please reply.
Thanks & Regards,
Prashant Dhakane