Hi,
We are using Push-Back type storage bins with 3 bin sections.
As per the standard , the putaway strategy can be achieved using pallet storage strategy .Is it possible to fix the bins for a particular product in the storage type which as storage behavior as pallet storage.
Is there any standard option available in EWM or alternate option to achieve the same.
Regards !!
Hi EWM Gurus,
I have customized the Inbound process with packing using Quantity Classification.
customizing details:-
1. Packspec -
2. Putaway strategies -
1011 - quanity classification 1(EA) - storage type a
1011 - quantity classification 4(PAL)- storage type b
Issue: - packaging specification is not getting determined at the packing work centre(external step - VS02).
Due to which system is not creating the desired handling units (as per the packaging specification).
Please let me know what could be the missing customizing here ?
Regards,
Ankush
Hi,
We are using the standard /SCWM/RFUI transaction for ITS transactions.
We are doing "Receive HU by ASN" step.
For serialized materials, it does not allow use to do a Partial GR. If an ASN item has 5 quantities, we want to pack three quantities into a new HU and receive it. But it gives an error.
Is it an expected behavior?
regards
Krishna
Hi Experts,
I have a issue in the wave release.
When i release the wave, error message says
-System could not determine source storage bin
Partial picking not defined for warehouse request 5000000015, 20-
Wave is released partially for other items. If stock is not there we do not need to release waves for complete ODO.
how to control this?
Regards,
Steve
Hi All,
We are getting an large number of dumps in EWM system after SPS upgrade.
All the Dumps with Load program lost and all the programs with "CL_GUI_DATAMANAGER============CP".
One Example:
Category Internal Kernel Error
Runtime Errors LOAD_VERSION_LOST
Application Component BC-ABA-LA
Date and Time 11/10/2014 03:39:25
Short text
The version of program "CL_GUI_ALV_GRID===============CP" in the database has
What happened?
Error in the SAP kernel.
The current ABAP "CL_GUI_DATAMANAGER============CP" program had to be
terminated because the
ABAP processor detected an internal system error.
What can you do?
The system attempted to correct the error
automatically, so you should try to restart
the program.
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
.
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
While the program was running, the program "CL_GUI_ALV_GRID===============CP"
had to be reloaded
from the database because a bottleneck pushed it out of the local
program buffer. However, the program found in the database had
a wrong load format.
This error may occur if several application servers with different
load formats use the same database. The load format normally changes
when you migrate to another R3 Release.
660 WHEN 'PROPERTY'.
661 CALL METHOD CL_GUI_CFW=>GET_SUBSCRIBER_BY_ID
662 EXPORTING
663 SHELLID = SHELLID
664 IMPORTING
665 SUBSCRIBER = PROXY
666 EXCEPTIONS
667 CNTL_ERROR = 1
668 OTHERS = 2.
669 IF SY-SUBRC EQ 0.
670 CREATE OBJECT NEWCONSUMER TYPE LCL_MYDATACHANGECONSUMER
671 EXPORTING
672 PROXY = PROXY.
673 ELSEIF SY-SUBRC EQ 1.
674 CREATE OBJECT NEWCONSUMER TYPE LCL_MYDATACHANGECONSUMER.
675 ELSE.
676 RAISE ERROR_CREATE.
677 ENDIF.
678 WHEN 'GENERIC'.
679 CALL METHOD CL_GUI_CFW=>GET_SUBSCRIBER_BY_ID
680 EXPORTING
681 SHELLID = SHELLID
682 IMPORTING
683 SUBSCRIBER = PROXY
684 EXCEPTIONS
685 CNTL_ERROR = 1
686 OTHERS = 2.
687 IF SY-SUBRC EQ 0.
688 catch system-exceptions move_cast_error = 1 others = 2.
>>>>> if_Proxy ?= proxy.
690 endcatch.
691 if sy-subrc ne 0.
Thanks,
Thamodaran.G
I would like to stop Transfer order generation and TO confirmation for a two different movement types respectively.
Could you please help me .
Hi,
When we are checking the Outbound Delivery in EWM, the HU related to the delivery is not found, (the delivery is in completed status), we want to see the HU linked to the delivery,
FYI..We will be archiving the HU's which is older than 15 days.
Will this archiving, remove the HU which is linked to the delivery? How can we find which HU was assigned to this delivery?
Can any one help.
Regards
Raj
Dear All,
I am new to HU (Handling Unit) concept.Can anyone explain me the steps to do Configuration.We are using Lean Warehouse Management.
Thanks
Hello Experts,
Addition to existing stock - conditionally if the expiry date is within 7 days then combine.
The scenario is if the existing product in storage bin SLED date is within 7 days u can combine with the incoming products , if not the product should proceed with the next Bin.
Can I do this with the standard setting or I have to make any further enhancement (BADI)???. Kindly guide me how to do this requirement........
Thank you
Regards,
Rajiv Gandhi
Hi All,
I have configured the counting process. And the data after confirming the tasks comes to the Quality inspection region, in the Counting work center.
I also have configured the Exception code for this and it still doesn’t show in the section as highlighted above.
And also when I try to Decide without difference it gives an error saying “ The document type 140 has already been cancelled”
Regards,
Karthik
Hi,
I want to restrict the minimum number of articles in one storage bin.Is there any configuration for that?
For Example :
I have A,B,C materials in 'F0101011' bin which are having same material type,Now if i want to put Material D in the same bin,System not allow to put that article,it means in one bin i want to put only 3 articles(A,B,C). Here i don't want to consider Capacity and weight of the bin.
Thanks
Hi,
I want to maintain only one article with maximum of quantity(which is maintained for that bin) in one storage bin,Is there any configuration for that?
Thanks
Hi,
I have the same product A in multiple fixed bins,
i.e., 3 EA in bin1, 4 EA in bin2, 10 EA in bin3.
Here when I have an outbound delivery requirement for 8 qty, picking should happen from bin3 only, i.e., it satisfies the outbound delivery requirement.
My concern as of now is it takes products from all the 3 bins to fulfil the requirement of picking of 8 qty.
How to do that?
Thanks,
Ganesan
Message no. /SCWM/L3300
I am working on a complex outbound delivery scenario.My Warehouse order has a task created for step OB01 .When i go to confirm the task system is giving error warehouse order has status "stopped"Change not possible.
Any pointers why i am facing this?
Regards,
Khushboo
Hi ,
While doing quality inspection in quality inspection work center ("/scwm/qinsp") , when i try to enter a decision code for the inspected quantity , I am getting an error saying " Unable to create the element; check configuration"
When i click on the error to view details, system exits from the quality work center. I have checked all the configs according to the link mentioned below :
Error during Quality Inspection in EWM
However the error still persists. Any help will be much appreciated.
Regards,
Karthik
Hi experts,
During picking, I don’t want to pick from multiple bins if a bin has stock to fulfil outbound requirements.
NOTE: I already have same products in multiple fixed bins.
1. Is there any possibility for doing this requirement in the Standard one? If yes, how can I do this? If no, please let me know how to do it?
2. Do I have to create new sort field for the strategy?
Please give me some idea about how to go about it.
Thanks in advance
Regards,
Jey
Hello,
We have a following requirement.
If my wave for example has 10 deliveries from 5 customers.
Our requirement is to create a single warehouse order for a common ship to party(I.e 5 Warehouse orders),upon wave release.
Can this be accomplished with WO creation rules or do we have to do enhancement?
Could you please advice if we have any enhancements/Badi to achieve the result?
Regards
Hi All
Is there any way to define fixed bin mappings using CSV file etc? I know the transaction /scwm/binmat but here we can't upload for all fixed bins through csv etc.. or using the config where first posting will fix the product to bin. But I am looking for a csv file upload like we do for storage bins and stock uploads in EWM.
Thanks
Sasidhar Gupta
Hi,
can any one help to explain the main difference bet. sap wm and ewm:
> configuration wise
> process wise
Regards,
Srin
Hi ,
While Put away system has to check the bin if it has any open pick WT ,If not then select the another bin for put away .
Please share your ideas to achieve the same.
Regards
Jerry.