Hello Experts
Is there a way to limit access of transaction /SCWM/RFUI to RF gun only? We don't want warehouse warehouse clerk to execute /SCWM/RFUI from their computer.
Thanks
Ankit
↧
/SCWM/RFUI
↧
SAP QIE Process and smq2
Hello all,
We are using QIE process and have question around it. When GR is done in EWM it creates a inspection document in ERP and when usage decision (UD) is made in ERP will it auto trigger the posting change to move from inspection to destination?
Currently when UD is triggered we are seeing a message stuck in smq2 with description XBTS000XX, when navigated it goes into XI XML message error.
Have anyone gone through this situation?
Thanks
Sudhakar
↧
↧
SAP Quality Inspection process
Hello all
Once Usage Decision is made in ERP , Parts are moved from Inspection (QI Stock) to Unrestricted stock, Will the inspection lot info still remain with quant when moved to unrestricted stock?
Example: When PI document created and all the unrestricted stock available in one bin , the user need to split the count based on quants (Inspection lot). Is it not possible to remove the inspection lot info once moved to unrestricted stock?
Thanks
Sudhakar
↧
Quantity in source bin will be negative
Hi Folks,
I have confirmed the WT with same quantity as of inbound delivery created in EWM.
After confirming WT I see the message " Quantity in source bin will be negative "
I am wondering why system giving this message though I have confirmed WT with same quantity.
Regards,
SS
↧
EWM Stock removal Strategies...
Hi EWM Experts,
We have stock removal strategy Stringent FIFO which proposes the oldest quant in the entire warehouse as the quant to be removed from stock.
For SLED based stock removal do we have any called Stringent SLED (similar to Stringent FIFO) which proposes products with the oldest shelf life expiration date are removed from stock first in the entire warehouse.
Appreciate your early reply.
Regards
Ramesh.R
↧
↧
Replenishment - Order based..
Hi Experts,
How does Order based Replenishment works with Open Warehouse Request.
We are facing issue in this method. Replenishment is not getting triggered.
Config in place but any prerequisites to be completed before it.
Appreciate your suggestion & quick reply.
Thanks & Regards
Ramesh.R
↧
GR status is not updated in ECC
Hi,
GR is done in EWM but not updated in ECC.
I found queue in SMQ2(Inbound Queue)
Please find the error msg of inbound queue in ecc
Regards,
Sunil
↧
Putaway Task not created
Hi everyone,
Scenario:- I have create inbound delivery & Create the task for unload. After the unload task confirmed system not create another task
And one queue stuck on SMQ2 and I check the log . Please advise what to do, perhaps Im missing some config or settings.
Below is the log:
***** HU WT Creation for HU 2676 *****
Storage control active for HU 2676 with storage process ZDEC
***** Putaway Warehouse Task Creation for HU 2676 - Start
***** Product WT Creation *****
For warehouse request PDI 963 10
For product 10000883; quantity 45.00000000000000 EA
***** Determine source data - start *****
Source HU 2676 entered; storage type: ; storage bin:
Determining source data with storage type:9010, section:, bin:GR-ZONE, HU:2676
Source storage type 9010 defined
Storage type search fully defined: No entry found
Storage type search with wildcard: No entry found
Determine stock in source storage type 9010
Determine stock in source storage bin GR-ZONE
Storage bin GR-ZONE is not assigned to any physical inventory area
Source storage bin GR-ZONE determined in storage type 9010
Handling unit type E1 determined
***** Determine destination data - start *****
Storage type search fully defined: No entry found
Storage type search with wild card: Search sequence KBSS and rule 2 found
Storage type search sequence KBSS found
Destination storage section check is not active in storage type KB30
HU type check is not active in storage type KB30
Split during putaway active for storage type KB30
Destination storage section check is not active in storage type GENR
HU type check is not active in storage type GENR
Alternatives during bin search: 1st alt. Stor.Bin Type, 2nd alt. Storage Sec., 3rd alt. StorType
Access table for bin search:
Storage type: KB30 storage section: **** bin type: T030 whse pos. eval.: 00000
Storage type: KB30 storage section: **** bin type: whse pos. eval.: 00000
Storage type: GENR storage section: **** bin type: whse pos. eval.: 00000
Start of destination bin search
Stor.type: KB30, stor.area: ****, bin type: T030, stock mvmt: 00000 being examined
Storage type KB30: HUs not allowed
Standard putaway behavior (storage type KB30)
Split during putaway active for storage type KB30
Determining a fixed bin (storage type KB30)
Maximum weight (incl. tolerance) for LocationK01-08-C01 was exceeded by 3,500 KG
Maximum weight (incl. tolerance) for LocationK01-08-C01 was exceeded by 3,500 KG
Capacity check against storage bin K01-08-C01
Weight: 1,000 KG are checked
against free capacity 1,000 KG with tolerance 0 KG
Partial qty 10.00000000000000 is put away in storage bin K01-08-C01 (product:10000883,storage type:KB30)
Split Occurred - Detailed information
Stor. bin K01-08-C01 found and assigned to product 10000883 as a fixed bin
HU was checked successfully
Dest. QTY 10.00000000000000 EA was determined (storage type: KB30, storage bin:K01-08-C01)
***** Determine source data - start *****
Source HU 2676 entered; storage type: ; storage bin:
Determining source data with storage type:9010, section:, bin:GR-ZONE, HU:2676
Source storage type 9010 defined
Storage type search fully defined: No entry found
Storage type search with wildcard: No entry found
Determine stock in source storage type 9010
Determine stock in source storage bin GR-ZONE
Storage bin GR-ZONE is not assigned to any physical inventory area
Source storage bin GR-ZONE determined in storage type 9010
***** Determine destination data - start *****
Storage type search fully defined: No entry found
Storage type search with wild card: Search sequence KBSS and rule 2 found
Storage type search sequence KBSS found
Destination storage section check is not active in storage type KB30
HU type check is not active in storage type KB30
Split during putaway active for storage type KB30
Destination storage section check is not active in storage type GENR
HU type check is not active in storage type GENR
Alternatives during bin search: 1st alt. Stor.Bin Type, 2nd alt. Storage Sec., 3rd alt. StorType
Access table for bin search:
Storage type: KB30 storage section: **** bin type: T030 whse pos. eval.: 00000
Storage type: KB30 storage section: **** bin type: whse pos. eval.: 00000
Storage type: GENR storage section: **** bin type: whse pos. eval.: 00000
Start of destination bin search
Stor.type: KB30, stor.area: ****, bin type: T030, stock mvmt: 00000 being examined
Storage type KB30: HUs not allowed
Standard putaway behavior (storage type KB30)
Split during putaway active for storage type KB30
Determining a fixed bin (storage type KB30)
Mixed storage in HU for storage type KB30 failed due to BAdI implementation
Maximum weight (incl. tolerance) for LocationK01-08-D01 was exceeded by 2,500 KG
Capacity check against storage bin K01-08-D01
Weight: 1,000 KG are checked
against free capacity 1,000 KG with tolerance 0 KG
Partial qty 10.00000000000000 is put away in storage bin K01-08-D01 (product:10000883,storage type:KB30)
Split Occurred - Detailed information
Stor. bin K01-08-D01 found and assigned to product 10000883 as a fixed bin
HU was checked successfully
Dest. QTY 10.00000000000000 EA was determined (storage type: KB30, storage bin:K01-08-D01)
***** Determine source data - start *****
Source HU 2676 entered; storage type: ; storage bin:
Determining source data with storage type:9010, section:, bin:GR-ZONE, HU:2676
Source storage type 9010 defined
Storage type search fully defined: No entry found
Storage type search with wildcard: No entry found
Determine stock in source storage type 9010
Determine stock in source storage bin GR-ZONE
Storage bin GR-ZONE is not assigned to any physical inventory area
Source storage bin GR-ZONE determined in storage type 9010
***** Determine destination data - start *****
Storage type search fully defined: No entry found
Storage type search with wild card: Search sequence KBSS and rule 2 found
Storage type search sequence KBSS found
Destination storage section check is not active in storage type KB30
HU type check is not active in storage type KB30
Split during putaway active for storage type KB30
Destination storage section check is not active in storage type GENR
HU type check is not active in storage type GENR
Alternatives during bin search: 1st alt. Stor.Bin Type, 2nd alt. Storage Sec., 3rd alt. StorType
Access table for bin search:
Storage type: KB30 storage section: **** bin type: T030 whse pos. eval.: 00000
Storage type: KB30 storage section: **** bin type: whse pos. eval.: 00000
Storage type: GENR storage section: **** bin type: whse pos. eval.: 00000
Start of destination bin search
Stor.type: KB30, stor.area: ****, bin type: T030, stock mvmt: 00000 being examined
Storage type KB30: HUs not allowed
Standard putaway behavior (storage type KB30)
Split during putaway active for storage type KB30
Determining a fixed bin (storage type KB30)
Mixed storage in HU for storage type KB30 failed due to BAdI implementation
Mixed storage in HU for storage type KB30 failed due to BAdI implementation
Maximum number of fixed bins (2) reached in storage type KB30
Stor.type: GENR, stor.area: ****, bin type: , stock mvmt: 00000 being examined
Storage type GENR: HUs allowed but not required
Standard putaway behavior (storage type GENR)
Capacity check against storage bin GENR-BIN-003
Weight: 2,500 KG are checked
against free capacity 999,999,999,999.999 KG with tolerance 0 KG
Storage bin GENR-BIN-003 was found (storage type GENR)
HU was checked successfully
Dest. QTY 25.00000000000000 EA was determined (storage type: GENR, storage bin:GENR-BIN-003)
***** Putaway Warehouse Task Creation for HU 2676 - End
Storage process step IB02 determined for HU 2676
Destination data set to 8010 due to storage control
Warehouse process type set to 3060 due to storage control
***** Determine source data - start *****
Source HU 2676 entered; storage type: 9010; storage bin: GR-ZONE
Handling unit type E1 determined
Determine stock in source storage bin GR-ZONE
Source storage bin GR-ZONE determined in storage type 9010
***** Determine destination data - start *****
Defaults for destination data: StorType:8010 Handling Unit:00000000000000002676
Destination storage type 8010 checked successfully
Destination storage section check is not active in storage type 8010
HU type check is not active in storage type 8010
Alternatives during bin search: 1st alt. Stor.Bin Type, 2nd alt. Storage Sec., 3rd alt. StorType
Access table for bin search:
Storage type: 8010 storage section: **** bin type: whse pos. eval.: 00000
Start of destination bin search
Stor.type: 8010, stor.area: ****, bin type: , stock mvmt: 00000 being examined
Storage type 8010: HU requirement
Standard putaway behavior (storage type 8010)
Capacity determined from HU 2676
Queue determination started with SFZ1/9010/8010/ /3060/ / /PTWY
Queue determination number 00001 with X/X/ / /
Queue not determined with SFZ1/9010/8010/ / /
Queue determination number 00002 with X/ / / /
Queue not determined with SFZ1/9010/ / / /
Queue determination number 00003 with / / /X/
Queue not determined with SFZ1/ / / /3060/
Queue determination number 00004 with /X/ / /
Queue determined with SFZ1/ /8010/ / /
Queue DECON-COM determined
Engineered Labor Standards Calculation
Work Steps for Selection SFZ1 8010 IB02 A:
Work step sequence: 0002 - step: 0002 - 00000
Condition: - constant: 5.000 - unit: MIN - formula
Overall result: 5.000 MIN (ELS was calculated: X)
Confirm still-unconfirmed product warehouse tasks for HU 2676
Confirm still-unconfirmed product warehouse tasks for HU 2676
An internal error has occurred
Regards
Ankit Kaushik
↧
How to post Receiving difference directly to Difference analyzer ?
Hello Experts,
How to post Receiving difference directly to Difference analyzer ? Which Exception code does the same.
Scenario is Vendor Receipt or Store return where only receiving system in SAP EWM.
This can be done in standard SAP EWM , but i am unable to find the same.
Regards
Inder
↧
↧
Production Material Request - Monitoring Warehouse Tasks
Hi all,
I'm using the Production Material Request (PMR) functionality which is available from EWM 9.2. Next to that, I have configured a POSC process which is triggered based on this PMR. The process itself runs smoothly, but I am missing some monitoring functions which are usually available for inbound and outbound deliveries.
My main problem is that my PMR is only linked to first WT of my process, in my case a picking WT. My next step in the POSC (packing) can be executed, but the WT is not linked to the PMR. This makes it pretty hard to follow the material as it is processed through the warehouse.
Any suggestions on how to improve this? Or does anyone know if SAP is already preparing functionality on this topic?
Regards,
Oliver
↧
Hello
How could I update Min Target Stock & Max Target Stock in MM43?
↧
Determining Minimum Quantity as Percentage of Maximum Quantity in MAT1
Hello together,
is it possible that the Value for the field within /SCWM/MAT1 in Storaga type data "Min.Qty (%of Max. Qty) is determined by the system automatically?
I did the customizing "Define Storage Type Parameters for Slotting" and entered 15 in Max./Min. Qty.
After activating the values via /SCWM/SLOTACT it is not maintaining the value in MAT1.
Does somebody know why?
Thank you.
br
Fatih
↧
No Bin Search Possibel
Hi ,
I am new to EWM .
I am trying to create a WT but system throws below error
No Bin Search Possibe Storage Types/Sections/Bin Types is incomplete
As I know I have done all sort of settings for Storage type/section/bin types search sequences.
What is preventing me to create WT.
Thanks,
Abhishek
↧
↧
Hi Experts,
Which standard report can give me Gross & Net Weight appearing in MM43.
I tried MARM but the Net Weight does not appear.
↧
SAP QIE Process and smq2
Hello all,
We are using QIE process and have question around it. When GR is done in EWM it creates a inspection document in ERP and when usage decision (UD) is made in ERP will it auto trigger the posting change to move from inspection to destination?
Currently when UD is triggered we are seeing a message stuck in smq2 with description XBTS000XX, when navigated it goes into XI XML message error.
Have anyone gone through this situation?
Thanks
Sudhakar
↧
Hide material field or material number in LM51 transaction code
Hi Gurus,
Good day! Is there a way to hide material field or the material number in LM51 transaction code?
Thanks,
Ruben
↧
Material 0 does not exist - SMQ2 ECC
Hello Experts,
I have confirmed WT and Goods Receipt is updated in EWM.
But in ECC it is not updated ,because queue is stuck in SMQ2 of ECC
Material 0 does not exist
Message No. HUSELECT040
Packaging material is created in EWM system .
I believe I have completed all config. in both system.
But curious to know about this issue.
BR,
Olet
↧
↧
Auto HU creation for IBD WT
Hello Experts ,
We have below scenario
The HU need to be created automatically when we confirming the WT from Staging to final Storage Bin. I have created the Pack specification for that material . but system is not generated the auto HU and asking the maintain the destination HU while confirming the WT.
Anybody have idea about this ?
Thanks and Regards
Pavan
↧
EWM Exception reporting(STD Reports)
Please help us to understand the Standard Inbound,OB,LE reports available in SAP EWM .
Could somebody kindly list down few (5-10) std reports (for Inbound ,Outbound and yard mgt./shipping) and give a line against each that what it will do ?
I have searched in the forum and couldn't find any .
Thanks
Manu
↧
SAP eWM 2-way integration simulation tools
SAP eWM 2-way integration simulation tools
I need your help to get implementation details on the below topic.
My client is implementing SAP eWM and the Knapp/SSI Schafer warehouse automation system
I'm looking for a test platform to test and simulate the two-way integration between the systems.
In particular, the movements of totes through the warehouse and their interaction with printers, rails, servers, racks, operatives.
There are OEM simulation software (e.g. Knapp KiSoft Sandbox) to emulate the warehouse side of the integration and simulate the statistical delays and queues associated with the printer and totes.
the simulation software should help to simulate the Idoc messages to and from the SAP and warehouse machines.
Does anyone have any examples of this being implemented with OEM simulation software eg KiSoft or other ?
Could you please help to get the implementation details like testing approach used during the testing phases like development, intergration, regresssion and UAT test.
↧