Hello Team,
Inspection lot with origin 17 is getting created and released in ECC as soon as the I/B GR is been completed in EWM . But this ECC inspection lot number is not updated in inspection document in EWM . I think due to this the UD of the inspection lot in ECC also is not updating in EWM inspection document .
Please suggest
Regards
Sam
Hi experts,
I am working with EGR process .
After creating inbound delivery in ewm ,I didn't found inbound delivery document in ecc.
Once Inbound delivery is created in ewm system shall create inbound delivery in ecc ? Isn't it ?
thank you
srini
Hi gurus,
I have created a pack spec for one material and it is creating automatic HU for Inbound delivery via Purchase Order.
But when I am using same material for Expected Goods Receipt system is not triggering automatic HU .
Do I have missed any configuration .
Thanks in advance.
Abhishek Aggrawal
Hi gurus,
How the quantity classification identifies the full pallet and partial pallet.
We have defined one storage type for full pallet and other for partial pallet storage.
System is not allowing to store partial pallet in full pallet storage type.
But full pallet are being allowed to store in partial pallet storage type.
How to restrict so that system shall not suggest partial pallet storage type for full pallet.
regards,
Srinivas
Hello experts,
I have question for you.
It happens often the inbound deliveries to stuck between systems P11 and EWM. See the atachment file.
How i can to reject or release inbound delivery 0180382877 ?
I hope you understand me 
Thank you !
Hi, Experts! I'm facing some dificulties to reverse a 2 Step Picking for a Group of Deliveries with LT0G and I would like to ask if there's any standard restrictions in this case, and if so, how can I reverse this 2 step picking group with sucess. Basically, I confirmed the TO's for Picking Step(Source Bin to Group Bin(Dynamic) to the Storage Type 200) and also confirmed the TO's for Allocation Step(Source Group Bin(Dynamic) from the Storage Type 200 to Delivery Number Storage Bin(Dynamic) at the Storage Type 916). Until here, everything is fine and working as expected. When I try to reverse the Picking confirmation for the Delivery using the tcode LT0G in Background, the stock returns to the Original Storage Type and the Delivery Picking Status turns from "C" to "A", and it's also fine. The problem is that, when I consult the Group(LX39), the Picking step is RED(traffic light) BUT, the Allocation step continuous GREEN(traffic light), with the TO's confirmed and without any change.. With this cenário, I can not continue the process, I can not repeat the picking steps using the same group, and also I can't change or delete the group or even remove the Deliveries from the Group to put in a new one due to the Group status(Allocation Confirmed). Is there anything i should check in the customization, or LT0G doesn's work to reverse 2StepPicking operation's and there is another standard way to do so? I'm using WM in SAP ERP 6.0. Best regards. Edmilson Lisboa
Hello Experts ,
I'm facing one issue at my customer . He is using EWM7.0 version .
From the ECC only one Outbound delivery was distributed to EWM system. However, system is created TWO ODR and TWO ODO. These Two ODO's are assigned to one Wave.
Due to this Picker did the Picking twice and the quantities were delivered to customer twice.
The surprise thing that how system generated Two documents using only one Delivery from ECC .
I have checked for exceptions. But there is no any exceptions and both are having full quantities.
Anybody can help me ? Waiting for your response.
Thanks
Pavan Kulkarni
Hi experts,
very stupid question (maybe):
When I'm in the PRDI, I can press the Goods Receipt button and post my product to the bin (in my case it's 9010, GR-ZONE).
When I have 2 different locations in 9010 --> how will the system chose the location?
Background: We have the production in ERP system, and now I want to have all RAW materials coming back from production in a different GR zone.
Any suggestions/ideas?
Thanks
Michael
Can someone please explain me what is BinDepth, BinSection & Bin Subdivision?
Hi All,
How can we change SLED (Shelf Life Expiry Date) of multiple quants (HUs) at the same time? I know that we change change SLED of individual item via MON > Stock and Bin > Physical Stock > Change Attributes. But when we select multiple HU or items it throws error message 'Select only one line'. If anybody knows any BAPI / FM also welcome..
Regards,
Savad
Hello everybody,
Can you please help me with the following issue?
During creation of WT automatically system splitts bathes. It is Internal warehouse movement, from one st. bin to other.
On the first step of creation WT system know number of product and batch, but in spite of the batch, the system searches the first created storage bin with other batches (Method FIFO). But for WPT I don´t define FIFO. In spro I don not use Storage types groups for my Storage type.
Thanks in advance.
Best regards,
Catharin.
Dear Experts,
Does EWM has great future? I heard that lot of customer not implementing EWM, rather than they prefer to go for 3PL. is that true?
where can I see number of current customers for EWM?
Could you please share your view about EWM?
Thanks and Regards,
Prabakaran Gurusamy
Hi Guys,
I have configured VAS inbound Scenario.Pack spec does not have a packaging material but have added work steps.
In my VAS order pack spec is getting determined.But in VAS work center work steps are not showing up.Any check points what could be the issue here ?
Regards,
Khushboo
Hello Experts,
My requirement is as below-
WO can have WT's from multiple deliveries based on different parameters in WOCR. But I only allow one consolidation group per HU. There is no limit on max HU's in a WO. One WO got created with multiple task from different deliveries.I was able to create 1 pick HU for each delivery as well.But during picking task confirmation system is proposing last HU to pick all products from different deliveries. I already have two PICK HU's and system should propose different pick HU's for items in both deliveries.
Attaching screenshot of limit parameters in WOCR.I also have packing profile maintained and its screenshot is also attached.
Regards,
Khushboo
Experts,
short question - is it possible to setup putaway strategy to first look for storage bins that already contain material/batch combination, then for empty bins?
In the Search sequence, I can setup the puaway rule to "Addition to existing stock/Empty bin", but in description I can see:
"The system first looks for empty bins. If no empty bins are found, it looks for partially occupied bins only."
So it search the "wrong way".
Example:
Actual example in the system:
I have a location A with max 3 pallets, 2 pallets are in (one pallet can be stored).
Today they moved one pallet back in the racks, system guided to a different empty location B (should go to location A)
Thanks for a hint
Michael
Hi All,
I am new to SAP EWM. My requirement is to create sub-menus under "Block Putaway" in Storage Bin section of monitor screen.
The last option here is Z and indicated to a Z FM which defines the logic of what should happen when its clicked. I think there should be some configuration where I need to assign the Z FM to this as a sub-menu. This was already done in the system and I do not know how. I need to use similar idea to achieve my requirement.
Please help me or share any ideas if any. Thank you.
Dear gurus,
THis question is for SAP WM (les component)
. Currently i am busy to set up à logical pallet calculation. The aim of this calculation is that several pallets have approximatically the same weight and height. So the first step is to check the heaviest weight item in the delivery and put this on pallet À. The second heaviest item of the delivery put this on pallet B. Check which pallet is the lowest one and put the next heaviest weight item on the lowest pallet etc. The second step is to determine per pallet à logical pille pattern. So put first the materials with à full pallet layer first on the pallet and put materials with less then à pallet layer on the materials of à full pallet layer. Question which user exits can i use? Hope to hear from you soon. Best Regards Richard
Hello,
Will the standard WM run on S/4 HANA? I know EWM will, just need to know if my customer will have a choice once they transition to S/4 HANA.
Thanks,
Chase Burns
SAP Chief Customer Office
Dear All ,
Thanks in advance for your kind cooperation.
Jinoy
Hi Guys,
I have configured VAS inbound Scenario.Pack spec does not have a packaging material but have added work steps.
In my VAS order pack spec is getting determined.But in VAS work center work steps are not showing up.Any check points what could be the issue here ?
Regards,
Khushboo