Hi Guys,
I have created packaging specification, completed "HU Check" and activated the packspes.
When I am trying "Follow on Functions" --> pack --> select the warehouse product and autopack button, it is not auto packing and the log is also empty.
Please let me if I am missing anything in config or the set up.
Thanks,
Ramesh.
Hi,
Could anyone please advise the most effective way to extract an operators daily movements?? preferably through a TCODE or through Se16.
Currently we are extracting data from LT22 to obtain there movement between storage types, this is a huge request on our system and often times out.
Any suggestions are welcome?
Thanks in advance
Rob
Hi,
I working on Transportation Cross Docking .
Currently using two plants for this scenario and a final customer as the destination .
I have created route for al the routes .
For example : From Route A to Route B and then Route B-C and finally from A - C ( Cross Docking Route ) .
Route is not determined even though all the setting are maintained .
I have simulated all the there routes but it is not getting determined during the outbound delivery process .
When I try to manually assign the route in the outbound delivery .
Below warning are found .
Attached the screen shot for reference .
Not sure what It means with the below error .
Manually assigning Route .
Simulated one of the route .
Please Help .
-Thanks
HI All,
How to handle return to vendor (IM mvmt 122) in SAP WM.
Senario is:
Step 1: Performed GR (101) for PO in MIGO
- System created TR(WM mvmt 101) and stock moved to interim storage location (902)
- I have not created TO from TR purpusfully
Step 2:I found some thing wrong and want to return to vendor
- Return to vendor (122) in MIGO
- System created another TR (WM mvmt 102) to issue from interim storage location (902)
- I tried to process TR and unable to complete as its ca't find source bin
Please advise.
Actually, If I move stock from interim storage to WM bins and process Return to vendor is successful.
Thanks
Rayudu
Hi experts,
I am working with EGR process .
After creating inbound delivery in ewm ,I didn't found inbound delivery document in ecc.
Once Inbound delivery is created in ewm system shall create inbound delivery in ecc ? Isn't it ?
thank you
srini
Hello,
is there any tracking number to a Customer Return with WM or with EWM, so we can trace in all return process step? Is there any standard field for that?
Thanks,
Jacare
Hi All
Can I do consumption posting in EWM system such that I will trigger consumption posting in ERP for a cost center with 201 movement type?
I have checked the transaction '/SCWM/ADGI' but, it does not have any such option in the drop down for 'GI Process'.
I have seen a node in EWM configuration at the node 'Interfaces -> ERP Integration -> Goods Movements -> Defind Custom specific movement types -> Communication EWM --> ERP custom movement types'.
But, I haven't seen any further controls for the EWM movement types given there.
Would you please help me if such thing is possible in EWM?
Thank you in advance.
Hello Friends,
We are facing one issue for one of the product in ewm , is that , it contained unbalance data in /scwm/mon in SAP EWM.
For available stock = no data
for physical stock = 450 ea
While ecc stock = ewm stock = 450 ea.
Can you please help out to get it resolved asap.
thanks
Regards,
rajbharati sinha
Hi,
In EWM, I want to get the report of SCRAP Postings which is done via T-Code: "/N/SCWM/ADGI" with different reason codes.
I have checked in posted Warehouse Task in monitor transaction but unable to get the specific report.
Example:
I want to get the report of last 12 months scrap posting done with Code: SCRP.
Please look into issue and help with any possible solutions.
Thanks,
Shimank Jain
Hi All,
I am trying to integrate EWM QM with ECC QM.
When I am trying to post goods receipt it is showing "Unable to find RFC destination for QM connection" . I tried assigning Logical system and Business system group in installations but it is still showing me the same error.
Regards,
Venky
We are facing the following requirement from one of our vendors.
We currently maintain a single EAN/UPC for each of our articles (Retail environment), whether it's an individual or a variant. This is of course updated to EWM via CIF.
Now we need to maintain several EAN/UPC for each article, for the same UoM (piece). Thus, in ECC transaction MM42 we updated the "Additional data> Additional EANs" view, which in turn updates table MEAN.
We are updating the customizing for CIF and table MEAN is available as a parameter for function module CIF_PRODUCT_SEND.
Our questions are:
- Where in EWM are the entries equivalent to ECC's MEAN table? (in which transaction, view, table?)
- Will the additional EANs be valid for scanning barcode instead of the product number? We know EAN is valid for 1 to 1 relationship, but we are not sure for the 1:n scenario.
Any guidance on this situation will be most welcomed. In the meantime we are doing some research on our own, and will share the information on this forum.
Best regards.
Hi All,
Am created two inbound delivery and one outbound delivery using system guided with selection unable get outbound task after inbound task confirmation am getting inbound task again back to back.
following configuration done.
Queue type defined and assigned to queue, resource group created and assigned to queue type
Please let me know if any other configuration or setting am missing
Thank you in advance.
Regards,
Richard
Hello,
we would like to use Production Integration with EWM but we are not sure which type of Integration we should use yet:
Actually we have customized our sandbox warehouse for the use of PMRs. Now we intend to test the delivery based way but we do not find customizing path to switch between both types.
Kind regards,
Peter.
Hi All,
We are implementing WMS (not extended WMS). and I have problem of
changing bin during confirmation(WM mvmt type 999) as system not allow to change dest bin.
Senario:
- I want to move stock from bin A to bin B 100PC
- Created TO for bin to bin transfer with mvmt type 999 ( LB10/ FM L_TO_CREATE_MULTIPLE)
-I want to confirm TO manually and need flexibility to change destination bin during confirmation
Currently I can create TO and confirm TO manually. But System not allow to change bin during confirmation.
Please help.
Thanks.
Rayudu
Hi Friends ,
Can any one tell me how to use FM /SCWM/TO_CONFIRM can anyone provide me example.
Hi Everyone.
Please help me to know ways to receive/remove stock from transit, when receiving plant/SL are EWM relevant.
User followed below steps and because of diff in OD and ID quantity, stock is still there in transit.
Plant: A : Normal Plant
Plant B: EWM Plant
Steps followed:
Now the difference = 800(OD)- 600(IN) = 200, is still in transit.
Please help. Let me know if more information is required.
Also, we dont want to go with scrapping 
Hello Experts,
I am working on the Quantity Classification and my requirement is to set up QC in such a way that if the stock comes in Boxes, it should go to a storage type B001 and if it comes in Pallets, it should go to P001.
The challenge is in setting up the packing specification. How do i set up various levels such that one level is specific to Box and another to Pallet.
Example:
Upto 20 PC = Box
Upto 50 PC = Pallet
I am using the Target and Min qty in the pack spec and have 2 levels. Is this the right way to go?
Also, what is the different between the "qty classification' which is mentioned in the General section of Storage Type and "PutawayQtyClass" which is in the Putaway Control section.
Hi Experts
We are using routes from ERP system.
It was working fine and we moved to testing system recently.
Now the problem is route field is blank at outbound delivery order.
What we are missing?
Can anyone throw some light on this?
BR
Patrick
Hi Experts
Is it possible to pick a product if expiry date is completed.
Material A - 10 Expiry date 04-25-2016
It doesn't find a stock after the wave release.
How to pick this stock even though it is expired?
BR
Patrick
Hi All,
I have created an inbound delivery in ECC System in TC-VL31N .The delivery is not replicated to EWM System .I am getting the following error
in TC-SLG1 .
" A DQM for SAP technical error occurred at transaction VL31N .".
1, I have checked in smq1 and smq2 in ecc and ewm systems- no queue in the systems.I have attached the screenshot .
Thanks
Sohan