Hello,
We have TM and EWM in our Landscape where we get the Outbound Delivery from TM to ECC and is Distrubuted to EWM System.We are Looking for a Functionality where we want to stop the Outbound Delivery in the ECC system itself if there is no batch in the Outbound Delivery.It sould not get Distributed into EWM system without batch in the Outbound Delivery.
Is there any standrad Functionality to accomplish this or we need to do a Development.
Thanks,
Kris..
Hello Experts,
Automatic Batch determination is possible in EWM recent version ?
As i know in ewm 2007 ,system can't performed automatic batch determination !
Please suggest ?
Regards,
Hi All,
At present am getting this error in RFUI Staging after loading.
Regards,
Rahull
How to save a Transfer Order and not Confirm a Transfer order
The status of the TO should be in yellow and not green
the status should be yellow and not green ...............................
through which function module we can achieve that functionality ?
Dear Experts,
I have experience in WM, but I am new to EWM. I am learning EWM, i am executing transaction /SCWM/MON- for sap standard Monitoring , it is taking very long time.
I mean it is in initial screen forever and not producing any result or error or moving forward. Could you please help me to figure out issue over here?
what are things needs to be checked
Thanks and Regards,
Prabakaran Gurusamy
Hi Gurus,
I need urgent help.
I am using RF for Cross Dock inbound process, where we have options for Unload, Putaway and Cross Dock.
there is a custome logical transaction for Unload and Putaway (LT1) and anothe logical transaction for Cross Dock (LT2).
If we press only Unload and Putaway the logical transaction LT1 is called from RFMAIN and completes the process, after that user can go to system guided and confirms the Putaway tasks.
But in case of Cross Dock, the Unload and Putaway task were created in back ground and we are calling LT2 from LT1 to confirm the task within the same process (system guided within the LT1). Here when we finish scanning 4 pallets (2 at a time), system throws a message 'Maximum Session Reached' and terminates.
Please provide your valuable inputs on this, how to correct this?
Thanks
Lalit Gupta
9899886063
Hi,
I'm developing a program which including many steps ,and one of them is to cancel picking for the relevant delivery(/SCWM/CANCPICK).
I'm looking for a function module or class-method which could implement the same function as tcode /SCWM/CANCPICK.
Does anyone has idea about this ? Thank you very much.
hello All
I am getting following error in attachment.
my scenario is like:
I have created return order then created return delivery.
In EWM i have defined POSC for that scenario.
Door- Grzone
Gr Zone to intermediate stage (Manual inspection .. no quality)
intimidated stage to final bin
after GR zone i am getting that error.
Kindly give me solution for that problem
Reagrds
Akash
Hello all,
I am trying to implement a case conveyor system within EWM 9.1 for outbound process with manual picking. Is there any configuration documentation available on this topic, apart from the SAP help portal?
Any help is appreciated. Thanks in advance.
Experts,
Created a PO and inbound delivery in ECC
but cannot able to find in EWM
Everything is fine so far suddenly it get stuck in ECC
Please advise what could be the reason and how to fix it
Regards
Raj
I am getting below messages in ECC (qRFC)
Cl. Queue Name Destination Entries Status Date 1 Time 1 NxtDate NxtTim
800 MCEX02 NONE 2 NOSEND 03.09.2015 03:39:02 03.09.2015 03:39:55
Function Module Queue Name Destination Date Time Status
MCEX_UPDATE_02_QRFC MCEX02 NONE 03.09.2015 03:39:02 Transaction recorded
MCEX_UPDATE_02_QRFC MCEX02 NONE 03.09.2015 03:39:55 Transaction recorded
Hi All,
I have a requirement to connect two different plants to single warehouse.
Plant 1000, Sloc 0001 - WH 0001
Plant 2000, Sloc 0001 - WH 0001
Plant 1000 is main manufacturing plant where as Plant 2000 is responsible for selling.
Stock of plant 1000 needs to be picked up by Plant 2000 when picking is intiated from 2000.
Meaning Stock of Plant 1000 will show owner as PL1000 , Party Entl to Dispose is PL1000
Stock of Plant 2000 will show owner as PL2000 , Party Entl to Dispose is PL2000
When Picking is initiated from PL2000 , EWM should also look for the stock belongs to PL1000.
How do I configure the system ?
I have done the set up for Stock Determination , but it seems it fails because we have tow Party Entl to Dispose.
Points given to owner or Stock type seems to be not working.
thanks,
mahesh
Hi All,
I am working on KIT to order Scenario and have done all the relevant configurations.
But when I am checking my ODO in EWM, I am not getting the "+" symbol for the component items in Level field, which is mandatory as per my knowledge.
Please Help!!
Hi,
We want to be able to manage bins by pallet capacity. In the MM, we have defined the cases per pallet. I want the system to be able to calculate the inbound pallets based on the palletization record in the material master and then putaway based on pallet capacity in bins.
Some bins will hold just one pallet, others two double deep and some triple deep.
Is there a way to achieve this?
Thanks,
vl
Hello all,
I am new to SAP EWM. I wanted to know how one can retrieve data from the various query tools available in SAP EWM.
I found the queries in the following link: Extended Warehouse Management - SAP Library
The description of the query 0WM_MP17_Q0001 says:
0WM_MP17_Q0001
You can use this query to see the number and duration of confirmed warehouse orders by day, week, or month. This allows you to see when typical warehouse trends are changing, and thus take actions such as:
And I need to retrieve the data for the reasons above.
However, is there a transaction code that I can run to get this report? How can I retrieve this data?
Thanks in advance for the responses.
We are looking at analyzing and if possible optimizing the following:
- Carton to order ration
- Cycle times (Order start to complete)
- Cadence / Flow (demand vs flow of work)
- Staffing (Building a staffing model around demand)
What are some of the reports/queries that are available in SAP EWM to retrieve data regarding this for further analysis?
Thanks in advance for all your responses.
Dear Experts,
I crated direct outbound delivery in EWM (e.g document types OPIG, ODSH) with 10 quantity.
Created pick task and confirmed only for 5 quantitty.
Picking status in the header changes to "Completed".
But this is not the case for normal outbound deliveries such as OUB, OUTS
Already checked and compated the quantity offsetting profile of direct outbound and normal deliveries.
Both are the same.
Please give a pointer why the behaviour of direct outbound deliveries are different.
Regards,
Malay
Hello EWM Experts
I am trying to set the process code(reject) for an Inbound delivery distributed from ECC to EWM but its in the Inbound delivery Notification(Act.) status.
I am trying to convert this notification to inbound delivery but getting the above error.Also when I try to reject the delivery ,I get the error(Activity "Reject Change" is not permitted; reason: status "Version" has value "Active").
I want to close this delivery in ECC with zero qty without having to undistribute the delivery.
Thanks for the help!
Akhil
Hi Experts,
I have configured production integration scenario for two ewm managed warehouses. So, one ewm managed warehouse is for warehouse and another ewm managed warehouse is for production supply area. So, when i stage the components for pick parts from CO02 after releasing production order - it is creating outbound delivery in ECC and the same is getting distributed to EWM but showing below error log - which is causing to get struck in inbound queues. Please help me in this issue.
Log:
Could not create header data delivery 0080001063, system ERP_001
An error occurred during validation of the object
Cannot create item 000010 of delivery 0080001063 from system ERP_001
Field Item: Production Supply Area is a required field for the action 020
Thank you in advance.
Hi All ,
I am working on acceptance sampling . I have configured quality management in ECC and EWM . The inspection document is not created in Inbound delivery in EWM.
I have maintained Inspection Rule , Sampling procedure for product (Screen shot attached ).
ECC Config
------------------
1.Define external system
2.QM System Installations.
3.Define task list usage
4.Define code group and code group decision
5 Inspection types-17
EWM System Config
---------------------------------
1 Generating -IOT-4
2.Defining Number Range For IOT-4
3.Defining Indexes For QIE
4.Maintain Follow up Actions
5.Defining Decision Code & Group Group .
Thanks
Tapan
Hi All,
At Present we have a scenerio for which we have to maintain external number for Pick-HU in outbound process which is happening fine in RFUI but in desk-top its unable to capture the same"Storage bin does not exist in WH J001" , please let me know if any thing as to be done.
Regards,
Rahull