Dear All ,
Greetings for day.
Kindly guide me on below error while picking , i have stock as highlighted in storage type T051 but i am not able to pick from same.
Thanks
Jinoy
↧
Storage bin not found
↧
Getting error ''PL Stock in transit exceeded by ###''
Hi,
I have two storage location in plant 001 which is Door and 002 which is used to keep stock for Final Putaway.
I made a inbound Delivery with receiving Storage location 001 and distribute delivery in EWM System.
As soon as i did the Goods receipt at Door and there is no issue or error at EWM Side.
But if i check the log in ERP System, system give me error
PL Stock in transit exceeded by 20 EA : 300000000131 ML50 0002.
I have using Process in which Material receive at Door -- Stag -- Repack into Pallet -- Pallet Storage Type.
There is 2 Availability Grp in EWM 001 and 002 corresponding to each SL.
For Storage Type P002, I have maintained 002 and for rest of intermediate there is no grp assigned to any Storage Type.
Regards,
Pardeep malik
↧
↧
2 different PPF actions triggering two different smartforms
Hi,
How to trigger two or three different smart-forms (which are triggered using different PPF actions) on to the same spool?
Suppose I have two ppf actions
1. triggers X smartform.
2 triggers Y smartform.
one after the other. Now the requirement is get the both into one spool. I know we can do by open-spool and close-spool. But I'm not looking for this solution.
Is there any specific configuraation with PPFs?
Thanks,
Sandhya
↧
system is not proposing to the quantity classification storage type in putaway
While working with the quantity classification I am facing the problem.
flow is
warehouse product 1 each is packed into packagaing material pallet with 30 each. HU type is Euro pallet.
I have maintained the packaging specification with one level and maintained quantity classifier as pallet (P).
in the storage type search sequence I have maintained search sequence with quantity classifier P and search sequence.
for the search sequnce I have maintained 3 storage types for example A,B,C.
the second storage type B is maintained with quantity classification as P.
I have maintained configuration optimize Access Strategy for Storage Type Search: Putaway with check box quantity classification.
for the received quantity of 30 from ERP I have packed the quantity.
when the task is created system is proposing the storage type A instead of storage type B.
↧
Error during Quality Inspection in EWM
Hi,
In EWM, I am trying to enter a Quality Inspection result for my customer returns via /SCWM/QINSP.
However, when I select a Decision Code (for example SA), the system immediately displays the following error message:
Unable to create the element; check configuration
Unfortunately, I'm not able to see any more details, because the transaction is terminated when I click on the error message.
Any ideas on how to solve this?
Thanks & regards,
Oliver
↧
↧
change loading status after PGI
Hi All
our client's requirement is to PGI outbound delivery first due to some reason, and then scan HUs to load them into a TU. i know once you PGI loading status becomes Not relevant. is there a Badi or FM that can change loading status from Not relevant to loaded after HUs have been loaded to a TU.
Thanks
Yong
↧
ECC->EWM interface - How to populate custom fields in EWM Append-structure?
Hi all,
I need your help please, can anyone advise?
We have the following situation:
Outbound Deliveries are interfaced from SAP ECC to SAP EWM according to the standard set-up, using OutboundDeliverySPE.SaveReplica and OutboundDeliverySPE.DeliveryChange.
Now I have to send some extra SalesOrder-fields from the ECC SalesOrder to EWM, and put them into the EWM Delivery table.
According Note 351303 I am able to fill the structure EXTENSION1 on ECC side with the required data.
In EWM, I enhanced structure /SCDL/INCL_EEW_DLV_ITEM_STR with an APPEND-structure, containg the new Custom-fields. These are now visible and usable in table /SCDL/DB_PROCI_O
In EWM I implemented BAdi /SCWM/EX_ERP_MAPIN_OD_SAVEREPL - method MAPIN from interface /SCWM/IF_EX_MAPIN_OD_SAVEREPL.
When debugging the Interface at that point, I can see that the segment EXTENSION1 is succesfully received in EWM with the new data.
My question is: Where, when and how sould I extract the data from EXTENSION1 and put them into the new APPEND-structure?
Do I have to put them directly into the DB table ?(I assume not)
How is EWM handling these APPEND-structures?
Thank you!
Best regards, Walter.
↧
Goods not updated in ECC
Hello Experts ,
I have created IBN and completed the GR process in EWM. The system updated the status as Goods Receipt is completed.
However, when I checked in ECC , system is not updated the Stock Qty in ROD . Also I found that in Inbound Delivery Status , the Document status is showing like DWE - Blocked ( Error in ERP ) . What could be the reason ?
I have checked the outbound Queue . In that , its showing with my user ID one function module : /SCWM/BW_UPDATE_PRE_QRFC - Transaction Recorded status.
Do you have any Idea where need to be checked from functional or technical point of view ? Your response is appreciated
Thanks and Regards
Pavan G Kulkarni
↧
Can we create Batch directly on Inbound delivery in EWM system ?
Dear Experts,
Our business requirement :
We want to create dummy batch per product.
We do not want use (T-code:/SCWM/WM_BATCH_MAINT) at the first,
so can we create batch directly on Inbound delivery in EWM system?
Our testing result is "ProductXX is not exist"
Best Regards,
Howard
↧
↧
Verification Field not getting displayed in my custom RF program
Hi Experts,
I have developed a custom RF Logical Tx having 3 steps. The 1st step of program contains a single field named Destination HU( /SCWM/S_RF_PACK-NLENR) and a push button for creating "New DestHU"(For New HU creation) .Upon pressing the button user is navigated to 2nd Step which has got 2 fields namely Destination HU( /SCWM/S_RF_PACK-NLENR) and Destination HU Verification( /SCWM/S_RF_PACK-NLENR_VERIF). The issue is during execution this Verif field is not getting displayed.
I have followed the below given steps for implementing the Verification field:
1. Filled Screen group 3 to "002".
2. Maintained the "Verification Profile" in customization for the 2nd Step and correct Presentation/Personalisation profile combination.
3. Checked the field named as "Valid.Prof" in the "Define Logical Tx Step Flow" against the FCode-ENTER of the 2nd Step.
Have I missed any step in Config or do I need to put some code in the PBO/PAI Function Modules?
Thanks,
Roopesh
↧
Post difference after WT confirmed
Dear Experts,
Please kindly help for the following business scenario:
The only way we would know the exact quantity picked is through a counting machine, which occurred after picking WT is confirmed. I would like to know is there any way to post quantity difference even after the picked quantity is confirmed?
Best Regards,
Eddie
↧
Error while picking for outbound delivery
Dear All ,
Below error for your expert guidance.
Thanks
Jinoy
↧
texts of inbound delivery is distributed from ECC to EWM
We have a trouble that our EWM key-user need a text information which written in inbound delivery(text site:goto--header--texts--warranties) of ECC, then the inbound delivery of ECC distribute to EWM via t-code vl06, the inbound delivery notification(IDN) and inbound delivery(ID) are created automatically via PPF, but there is nothing texts information in ID or IDN.
My question is how to get the text information in inbound delivery from ECC and display that text in ID in EWM.
Thanks & Regards
Aries
↧
↧
Error while maintaining Activity area per storage Type
Hi,
I am getting following error while maintaining activity area per storage type
''This syntax cannot be used for an object name''
Message no. TK103
Diagnosis
The syntax of the transferred objects is incorrect. R3TR VDAY /SCWM/V_TAAREAD made this check.
This could be caused by the following:
- The object type R3TR VDAY is unknown
- The syntax of the object name /SCWM/V_TAAREAD is incorrect
- The object is a component of a system object
System Response
The function terminates.
Procedure
Correct the syntax.
Regards,
Pardeep malik
↧
Update LOBM_VFDAT in AUSP..
Hi All,
I Have a custom logic for VFDAT and its working fine in VL01N->Batch split->New Batch->Selection criteria there LOBM_VFDAT is displaying correctly Via an object dependecy FM(custom logic for LOBM_VFDAT).
But the problem which i am facing is that the values which is populted in Selection Criteria for LOBM_VFDAT is not updated in AUSP.
Did anyone have any Idea how can achive this.
Thanks,
Ahmed...
↧
Error Meaage-Delivery item : Goods Movement bin not populated
Dear Experts,
When I make the transaction mov 561 in ERP system,and than I wan to GR this document in EWM system.
The error message show that
Delivery XXXXXX item10 : Goods Movement bin not populated
How do I solve this problem?
Thank You
Best Regards,
Howard
↧
Cross docking in EWM with material number
Hi,
There is a requirement to cross dock (Box in and Box out). Please inform whether it is feasible to cross dock the Handling units in EWM without creating the material numbers in HU in ECC / EWM system.
Regards,
Mrinal
↧
↧
S159 table update issue VL35 (wave picks)
Hi all
I have an issue.
I am trying to configure wave pick according to time slots and capacity restrictions
I have done the following configs
- Number Ranges for Wave Picks
- Define Group Types for Wave Picks
- Define Number Range for Group
- Calculate Workload
- Control Update of Workload Data (below screenshot as it is, could not figure out this one)
- Maintain Time of Comparison for Forming Wave Picks
- Maintain Wave Picks Profile
- Maintain Time Slots
- Maintain Time-slot Group for Wave Pick
After this I create a delivery for picking through VL04 for a stock transport order
And then I execute VL35. I get below warning message. I am stuck here.
Searching a lot of places i found that S159 update might be one of the issues.
I checked and indeed S159 is not updated. I checked in MC26, table update is active.
OUR REQUIREMENT:
What we want is to create a wave containing multiple deliveries with similar goods issue time.
Pick the wave in 2 steps, i.e. pick from racks and then distribute to different trucks. Replenishment functionality is also required.
Also I went through SAP documentation but I am still not clear when to execute VL35 and in fact the entire functionality
What will be the steps
Create delivery >> Create Group >>Create TO from group >> Create Wave from group>> Process wave>> PGI?? Am very confused. 
Or is wave created after PGI.
Appreciate any help.
↧
Pick Pack Pass with POSC
Dear Experts,
We will be implementing Pick Pack Pass due to conveyor setting in the warehouse. And after all sub-WOs are completed, we would like the pick-HU pass through a staging point(bin 0020-04-04-B in below picture). But after the pick-HU enters the bin, the subsequent WT to GI-zone is not created automatically. I have try a few external steps for this purpose but none of them works. Please kindly share some thoughts.
Best and Thanks,
Eddie
↧
2 different PPF actions triggering two different smartforms
Hi,
How to trigger two or three different smart-forms (which are triggered using different PPF actions) on to the same spool?
Suppose I have two ppf actions
1. triggers X smartform.
2 triggers Y smartform.
one after the other. Now the requirement is get the both into one spool. I know we can do by open-spool and close-spool. But I'm not looking for this solution.
Is there any specific configuraation with PPFs?
Thanks,
Sandhya
↧